1-Phase AC Motors
Boat Hoist Duty Motors - The Electra Gear line of Boat Hoist Duty motors provide customized features that are needed to support the Boat Hoist industry.
Agricultural and Farm Duty Motors - Leeson''''s complete line of single-phase Farm Duty / Agricultural Duty Series of motors are designed and built for the tough applications found in the agricultural industry.
General Purpose Single-Phase Motors - LEESON Electric and Lincoln Motors line of single phase General Purpose AC motors include both ODP (For use where water and dust exposure is moderate. Ideally suited for use on pumps, compressors, blowers, fans, and other direct or belt-driven applications) and TEFC enclosures (For use where exposure to water, dust and corrosives exists. Ideally suited for use on pumps, compressors, blowers, fans, conveyors, machine tools and other direct or belt-driven applications).
Explosion-Proof Motors - Explosion-Proof motors are ideally suited for hazardous environments defined by the motor''''s explosion-proof class and group rating for use in applications that may contain explosive gases or materials.
Washdown Duty Motors - Leeson''''s line of Single-phase Washdown Duty Motors includes our original moisture-shedding "Duck? motor. The Premium stainless and SST stainless line are also offered in single-phase ratings through 10 HP.
Brake Motors - This line of Single-phase Washdown Duty Motors includes Leeson''''s original moisture-shedding "Duck? motor. The Premium stainless and SST stainless line are also offered in single-phase ratings through 10 HP.
Compressor Duty Motors - Motors designed for air compressors, pumps, and fan and blower applications, which require high breakdown torque and rugged mechanical construction.
Instant Reversing Motors - Our Instant Reversing motors are specifically designed for Parking Gates (Specially designed for use on "Instant-reversing? parking gates, doors, slide gates, or other moderate starting torque instant reversing applications. Capable of frequent reversing service. 1/3 ? ? HP, Open Drip Proof, Resilient mount having manual overload protectors), Door Operators (Instant "plug-reversing? with simple three-wire connection. PSC design offering low inrush and full load amps. 150% starting torque, approximate, is suitable for hard to start loads. 1/3-1/2 HP, Open Drip Proof, C-Face less base mounting having manual overload protectors) and Slide Gate applications (These Capacitor Start, induction run motors utilize a solid state, instant reversing switch, for changing the rotation of the motor. ? - 1HP, Rigid Base, TEFC designs are available having Manual overload protectors).
Pumping Motors - Leeson have a large line of Jet Pump Motors (For use in Commercial and Industrial water pumps and water systems), JP Pump Motors (For use with close-coupled pumps where the pump impeller is mounted directly to the motor shaft in environments that are relatively clean and dry), and JM Pump Motors ( For use with close-coupled pumps where the pump impeller is mounted directly on the motor shaft in environments that are relatively clean and dry).
Fan and Blower Motors - Leeson has a large line of Resilient Base Motors, Two-Winding Variable Torque (PSC Type for shaft mounted applications), Two-Speed, Two-Winding, Variable Torque for Belt Driven / Shaft Mounted Fan Applications, Aeration Fan Motors, Industrial Split Phase Fan Motors, Residential / Industrial Belted Fan Split Phase Motors, Premium Efficient Residential / Industrial Belted Fan Motors, and Pedestal Fan Motors.
Two Speed Single-Phase Motors - These fan and blower duty motors are designed for dependable, energy saving performance in applications where the fan is mounted on the shaft of the motor. These PSC type motors do not require a centrifugal switch, resulting in higher reliability and because of their low amp design, they are energy efficient. 56 frame motors are painted with an epoxy paint and the 48 frame models have a baked-on powder coat for extra corrosion resistance in tough applications. All motors have extended thru-bolts for mounting to the fan cage and because they are TEAO designed motors, they must be mounted in the air stream of the driven fan. Two-speed operation can be achieved by using the proper auxiliary switch.
Woodworking Motors - Motors are designed for woodworking equipment such as lathes, table saws, planers etc. Totally enclosed designs prevent motor problems caused by wood dust and shavings.
Pressure Washer Motors - Motors are specially suited for hot or cold pressure washer applications. These motors are designed using a start and run capacitor for low amperage.
For more information, click on the image next to the corresponding text.
No products have been assigned to this category.